Tenmat Fire Rated Fixture Protection Covers - fire rated - UL Listed

Item # TEN-FF109-300
Price $61.97
Sale Price
You Save
Options
Quantity
Tenmat fire rated lighting covers are designed for prevention of ceiling fires in recessed lighting. Designed as covers for canned fixtures they are cup shaped and intumescent which seals flames and smoke during a fire.
 
 
Features and Benefits
 
•       Does not require drilling, screws or sealant
•       Easy installation, can be installed in a short time
•       Made from an intumescent material with high sealing capabilities of up to 1 hour that chars and expands to seal smoke out
•       Highly flexible which can be retrofitted or fitted around other obstacles
•       Perfect for churches, school, businesses and also home use on a variety of fixtures
•       Has been made with two vent holes for preventive measures to stop the risk of the light fixtures from overheating
•       Covers can be reinstalled or removed for maintenance  
•       Is versatile and can be installed from below or above the ceiling
•       Reoccurring labor costs can be saved as these require no additional inspections or maintenance once installed.
•       UL R25019 and ETL Listed
 
TEN-FF109X TEN-FF109-300 TEN-FF109-350
Length Of Protection Two Hour One Hour One Hour
Listed (UL) R25019 R25019 R25019
OPL / Intertek Listed No No LC101
Diameter 15" 13" 15"
Inside Height 8" 8" 11"

Where would I use it?
 

•       Plasterboard
•       Concrete
•       Where light fixtures need protection against fire spread
•       Ceiling that are fire rated, acoustical, and suspended How would I install this product?
 
For the TEN-FF109-300 1 Hour Rating
 
•       Make sure the right size cover is chosen for the light fixture that is to be covered
•       Screw the hanger bars to the joists in conjunction to hammering the tabs to the joist
•       Slit the cover so that it fits over the hanger bars of the chosen fixture. Do not exceed 1" in the slits
•       Feed the wire through one of the vent holes in the top of the cover
•       Place the cover over the fixture so that it fits neatly and flat against to drywall board
 
For the TEN-FF109X  2 Hour Rating
 
•       Check the inside of the cover and make sure the padded area is placed neatly over the can while the non padded area is placed over the junction box
•       Place cover over the fixture and cut four slits in the bottom just enough to fit the hanger bars and for the cover to fit neatly against the drywall board
•       Place a hole in the side of the cover with a knife and feed the wires through
•       Check to make sure the cover overlaps the hangers and meets neatly with the drywall board or ceiling tile surface
 
For the TEN-FF109-350 1 Hour Rating
 
•       Make sure the right sized cover is chosen for the fixture
•       Screw the hanger bars to the joists in conjunction to hammering the tabs to the joist
•       Slit the cover so that it fits over the hanger bars of the chosen fixture. Do not exceed 1" in the slits
•       Feed the wire through one of the vent holes in the cover at the top
•       Place the cover over the fixture so that it fits neatly and flat against to drywall board surface
 

Specifications and Technical Notes

 

Part #

TEN-FF109X

TEN-FF109-300

TEN-FF109-350

Length Of Protection

Two hour One hour One hour

Listed (UL)

R25019 R25019 R25019

OPL / Intertek Listed

No No LC101

Weight

2.5 lbs 1.5 lbs 2.5 lbs

Certifications and Testing

ANSI/UL 263 UBC 7 1 ASTM E119 ASI A2.1 CAN/ULC S104-04 NFPA 251   UBC 7 1 ASTM E119 ASI A2.1 NFPA 251 UL 263 ASTM E119  ASI A2.1 NFPA 251 UBC 7 1
 

Safety Elements

 

·      Make sure installation is done according to the manufacturer's instructions per fixture and cover that is bought

·      Do not place in wet areas

·      Store in dry areas

·      Make sure cover is sitting against the ceiling flat after installation is complete

Standards Endorsing this Product

·      ANSI/UL 263

·      CAN/ULC S104-04

·      UBC 7 1

·      ASTM E119

·      ASI A2.1

·      NFPA 251

·      UL R25019 and ETL Listed

 

Specifications and Technical Notes

 

Part #

TEN-FF109X

TEN-FF109-300

TEN-FF109-350

Length Of Protection

Two hour One hour One hour

Listed (UL)

R25019 R25019 R25019

OPL / Intertek Listed

No No LC101

Weight

2.5 lbs 1.5 lbs 2.5 lbs

Certifications and Testing

ANSI/UL 263 UBC 7 1 ASTM E119 ASI A2.1 CAN/ULC S104-04 NFPA 251   UBC 7 1 ASTM E119 ASI A2.1 NFPA 251 UL 263 ASTM E119  ASI A2.1 NFPA 251 UBC 7 1
 

Safety Elements

 

·      Make sure installation is done according to the manufacturer's instructions per fixture and cover that is bought

·      Do not place in wet areas

·      Store in dry areas

·      Make sure cover is sitting against the ceiling flat after installation is complete

Standards Endorsing this Product

·      ANSI/UL 263

·      CAN/ULC S104-04

·      UBC 7 1

·      ASTM E119

·      ASI A2.1

·      NFPA 251

·      UL R25019 and ETL Listed

 

Please Watch the Tenmat Fire Rated Lighting Video Below

You May Also Like...

Related Categories

eCommerce software powered by SolidCactusEcommerce