STI Ready Split Firestop Sleeve Kits

Item # STI-FSR100
Price $98.22
Sale Price
You Save
Options
Quantity

Ready Split Sleeves come with a split pathway design plus wall plates that allow them to be installed around current cable bundles. They are lightweight making for easy installation in higher areas or cramped spaces in construction zones.

PART # TRADE SIZE MIN. OPENING MAX. OPENING PLATE DIAMETER MIN. WEIGHT
STI-FSR100 1" (25mm) 1.16" (30mm) 2.25" (57mm) 3" x 3" (76mm x 76mm) 1.25 lbs
STI-FSR200 2" (51mm) 2.38" (60mm) 4.0" (102mm) 4.5" x 4.5" (114mm x 114mm) 2.78 lbs
STI-FSR400 4" (102mm) 4.5" (114mm) 6.0" (152mm) 8" x 8" (203mm x 203mm) 7.25 lbs

Features and Benefits
  • No need for conduit bushings due to the smooth rolled lip finish
  • Easy inspection for wall and sleeve labeling
  • Wall plates consist of mounting holes to help secure the sleeves in larger openings
  • Smooth cable entry with built in bushings to reduce damage to cable jacketing
  • Easy installation by clamping and securing the sleeve within the wall
  • Kit includes SpecSeal® Firestop putty and external firestop gaskets to seal sleeve into place
  • Perfect for video, data, power, communication and control cabling that runs through sleeves through rated barriers
  • Is able to be installed to cables that have already run through walls
  • Can accommodate for any present cables and new cable growth within the area
  • ASTM E814, ANSI/UL 1479 rated F - 4 hour use for over-sized openings.
  • 2003 IBC section 712.2 compliant
  • 1 year manufacturer warranty
  • Lightweight
  • Original design specially designed for concrete walls and flooring, gypsum walls, plus concrete block walls up to 10" thick
How would I install this product?
  • Take the two pieces of split tube and make sure the cable is placed within the tube neatly. Close and connect tube together
  • Slide sleeve into opening carefully and center it equally within the wall
  • Install gaskets around the sleeve and slide towards the wall so it is flat against the wall surface
  • Install the two piece escutcheon plate around the sleeve and slide against the wall so it sits flat against the surface. Tighten screws.
Where would I use it?
  • Concrete walls
  • Concrete floors
  • Gypsum board/wall stud assemblies
  • Concrete block walls
   

 

Specifications and Technical Notes

 

System Nos use - F-A-3029, W-J-3141, W-J-3142, W-L-3275, & W-L-3276.

Sizes Available

25 mm - 1" ,  51 mm - 2" ,102 mm - 4"

Construction (Sleeve)

1.5 mm - 0.059" zinc plated  thick steel

Construction (Plate)

1.9 mm - 0.074" 28 gauge galvanized thick steel

  Intumescent Gasket

Temperature (Expansion)

177° C - 350° F

Expansion (Volume)

15 times free expansion

Temperature

(In-Service)

54.4° C - 130° F

  Putty Fill

Material

SpecSeal® Firestop Putty

Color

Red

Odor

0

Solids

100 percent

Temperature (Expansion)

110° C - 230° F

Expansion (Volume)

8 times free expansion

Temperature (In-Service)

54.4° C - 130° F

Content (VOC)

0.00 lbs/gal (0.0 g/l)

Shelf Life

Unlimited

cULus Classified

ASTM E814,  ANSI/UL 1479 rated F - 4 hours for use (over-sized openings)

FM

Approved

IBC

2003 IBC section 712.2 compliant

 

 

 

 

 

Safety Elements

 

·       Make sure sleeves are installed as per manufacturer's instructions

·       Make sure cables are set neat within the cables

·       Keep putty away from water or high moisture areas

·       Store in dry areas before installing

 

Standards Endorsing this Product

 

·       ASTM E8146

·       ASTM E119

·       ASTM E1966

·       ASTM E84

·       ASTM E1399

·       ASTM E136

·       UL1479

·       UL 263

·       UL2079

·       UL723

·       1 year warranty under manufacturer's requirements

SKU:  STI-FSR100

 

Description:

Name of product: Specified Technology Ready Split Sleeve 1, 2 and 4 Inch Models

Additional Material Included in Kits: Wall labels, pre-cut split metallic sleeve, intumescent gaskets, split mounting plates, and putty to seal ends.

Trade Size: 1" (25mm)

Min. Opening: 1.16" (30mm)

Max. Opening: 2.25" (57mm)

Plate Diameter Min: 3" x 3" (76mm x 76mm)

Weight: 1.25 lbs

Color: Red (Putty Fill)


 

SKU:  STI-FSR200

 

Description:

Name of product: Specified Technology Ready Split Sleeve 1, 2 and 4 Inch Models

Additional Material Included in Kits: Wall labels, pre-cut split metallic sleeve, intumescent gaskets, split mounting plates, and putty to seal ends.

Trade Size: 2" (51mm)

Min. Opening: 2.38" (60mm)

Max. Opening: 4.0" (102mm)

Plate Diameter Min: 4.5" x 4.5" (114mm x 114mm)

Weight: 2.78 lbs

Color: Red (Putty Fill)


 

SKU:  STI-FSR400

 

Description:

Name of product: Specified Technology Ready Split Sleeve 1, 2 and 4 Inch Models

Additional Material Included in Kits: Wall labels, pre-cut split metallic sleeve, intumescent gaskets, split mounting plates, and putty to seal ends.

Trade Size: 4" (102mm)

Min. Opening: 4.5" (114mm)

Max. Opening: 6.0" (152mm)

Plate Diameter Min: 8" x 8" (203mm x 203mm)

Weight: 7.25 lbs

Color: Red (Putty Fill)


 

You May Also Like...

Related Categories

eCommerce software powered by SolidCactusEcommerce