Structural Steel Fire-proof Coating

Item # al-clad-tf
Price $525.15
Sale Price
You Save
Options
Quantity
Albi Clad TF fireproofing is a thin-film, water-based intumescent coating that is manufactured to be used as a fireproof protective coating for structural steel that is exposed to elements and possible fire outbreaks. Used for commercial buildings it features a combination of a decorative, attractive interior finish and intumescent fire protection that can provide an architectural structure with an aesthetically pleasing finish.  

Features and Benefits
  • Underwriters Laboratories Inc listed
  • Provides up to 3 ½ hours of protection
  • Abrasion resistant durable surface after applied
  • Applies to an area like paint
  • Used for commercial interior structural steel
  • Water based intumescent coating for providing fire protection
  • Attractive architectural and professional finish
  • 100% asbestos free
  •  

    Coverage
      Albi Clad TF exhibits coverage rates per gallon, which can be easily calculated utilizing a standard paint coverage equation. The formula is as follows: 1604 X 0.70 (% volume solids) = square ft. per gallon (at 100% transfer efficiency)dry film thickness
      How Would I Use This Product?
    • Clean the surface area so it is free from dirt, oil, dust or any other foreign object
    • Prime the area (any water-based alkyd primer will do) and decide whether to use a trowel or spray to apply the Albi Clad TF to the specific location.
    • Depending on various conditions such as humidity, heat, and cold weather please see the application guide for applying either the spray or paint form of the Albi Clad TF. This guide will help you to prepare and complete your installation to the best possible standards available.
        Where Would I Use It?
    • Trusses
    • HSS columns
    • Manufacturing facilities and industries
    • Fire escape stairways
    • Exposed steel in atriums
    • Structural steel beams
    • Hospitals
    • Clean rooms
    • Convention centres
    • Parking garages
    • Warehouses
    • School gymnasiums
    • Commercial buildings where high fire danger is evident

    Standards Endorsing This Product

    • ASTM E-119
    • ASTM D695-91
    • ASTM D952-90
    • ASTM D1044-90
    • ASTM D256-90b
    • ASTM E 84
Specifications
Property Value
Compressive Strength 300 psi
Dry Applied Density 85 PCF
Cohesive and Adhesion Strength 190 psi (cohesive failure)
Hardness 45-50
% Solids by Weight 70% + 2.0%
Weight per Gallon 11.90 + 0.20 lbs./gals
Smoke Developed 5 - Class A
Flame Spread 2 - Class A
Impact 0.77-ft lbs./inch of notch
Abrasion Resistance 0 grams loss
    ALBI CLAD TF UL FIRE-RESISTANCE LISTING: Fire Test ASTM E-119
Typical System Material Thickness Hourly Rating UL Design No
Beam (Wide Flange) W8 x 31 .090 in. dft 1 (unrestrained) N-607
.090 in. dft 1-1/2 (restrained) N-607
.140 in. dft 2 (restrained) N-607
Beam W10 x 88 .149 in. dft 1-1/2 (unrestrained) N-607
.400 in. dft 3 (restrained) UL 11-29-99
Column (Wide Flange) W8 x 24 .313 in. dft 2 X-625
W10 x 49 .055 in. dft 1 X-625
.132 in. dft 1 ½ X-625
.310 in. dft 2 X-625
.430 in. dft 2 ½ X-625
.550 in. dft 3 X-625
.670 in. dft 3 1/2 X-625
W12 x 120 .108 in. dft 1 ½ X-625
.192 in. dft 2 X-625
Column (Hollow Section) 8-Inch pipe 1 .120 in. dft X-628
1-1/2 .230 in. dft X-628
2 .370 in. dft X-628
2-1/2 .520 in. dft X-628
3 .660 in. dft X-628
(schedule 100) 3 .625 in. dft X-628
4 x 4 x 3/8” 2 .431 in. dft X-638
8 x 8 x 3/8” 1 .119 in. dft X-638
8 x 8 x 1/2” 2 .334 in. dft X-638
10 x 10 x 5/8” 1 .065 in. dft X-638
2 .265 in. dft X-638
16 x 16 x1/2” 1 .065 in. dft X-638
2 .334 in. dft X-638
16 x 16 x 5/8” 1 .065 in. dft X-638
2 .265 in. dft X-638
  Safety elements
  • May cause headaches if inhaled. If inhaled remove to a well-ventilated area and call your doctor if symptoms persist or become worse
  • Skin may become irritated. If skin irritation starts, remove clothing and wash areas that are affected thoroughly
  • Irritation may occur when in contact with eyes. If eye contact happens wash immediately with water for 5 minutes.
  • If ingested, may cause vomiting, nausea, gastrointestinal irritation and diarrhoea. Dilute by drinking water and immediately call your doctor or poison control centre for advice
  Standards Endorsing This Product
  • ASTM E-119
  • ASTM D695-91
  • ASTM D952-90
  • ASTM D1044-90
  • ASTM D256-90b
  • ASTM E 84

You May Also Like...

Related Categories

eCommerce software powered by SolidCactusEcommerce